90's Tshirt Reconstruction Tutorial

So,  I have had this 90's itty-bitty top since high school, when I stole it out of my mom's old clothes.  I always wanted to make it into the top of a dress.  So I finally took an old grey tshirt, and come scrap blue jersey material and made a dress with it all!  I also found a bright red zipper in my stash, and used it in the back for a little pizzazz.

Here are the steps:

1.  Gather your materials.  You will need t shirts, jersey, scissors, a zipper, and a handy dandy sewing machine.

2.  So my grey t shirt had a pocket on it, so I removed it with a seam ripper.  Then cut the neckline and sleeves off of your t shirt.

3.  Next take the large body section of your t shirt and fold it in half.  Cut through both sides of fabric, creating a trapezoid shape.  Make sure the wider end is the original hem of the t shirt, so you don't have to rehem it later. 

4.  Cut one of the large body pieces in half, leaving you with two back pieces, and one front piece. Cut out a strip of fabric (mine is blue) for the waist that is about 2-3 inches tall, and as wide as the front part.  (I trimmed 2-3 inches off the top of the front piece, so when the blue is sewn to it, it will be the same length as the back pieces.) Next cut out two long pieces the same height as your front blue piece.  Make sure these strips are long enough to wrap around your body and tie into a nice bow in the back.

5.  Use a zig zag stitch with jersey material to let it stretch afterwards.  Now sew the front blue strip to the top of your front grey piece.  

6. Now we are going to make a sandwich.  Take your entire front piece ( blue and grey sewn together), right side up and put it as the bread. Make the filling with one end of a strip, and the other piece of bread is one of your back grey pieces right side down.   Pin and repeat with the other side. (Make sure the angled outside edges (of the grey) are lined up, so when it lays flat it is symmetrical and lines up correctly.)

7.  Sew the two sides together, so you have one nice big piece, with the blue tie ends free. I didn't hem my waist ties because jersey is awesome and doesn't fray.

8.  Now pin and sew the top part of your dress onto the body.  After that sew the entire back seam together if it is stretchy enough, or install a zipper into the top part.  I used a zipper because the 90's top had no stretch to it.

Feather hair piece

So, here is another feather hair piece I made, and the video to go along with it by Threadbanger!

Enjoy!  I used a french barrette for mine.

Another sweater reconstruction

So, I took another old sweater and cut it apart.  I wish I had a picture of it before, but I forgot to take a picture of it.  I'm going to make another one of these dresses.

I cut up the sleeves of the sweater and made it into a braided strap.  The neckline is slightly sweetheart.

Then I added some chains to the braid.

My first tutorial!!!

So this is my first tutorial.  It was really fun!  So, this tutorial is how to turn an ugly, over-sized sweater into a mini dress and legwarmers.

Mine turned out pretty 80's looking.

Here are the steps:

1.  Cut the sides of the sweater, the neck off, and cut the sleeves off.

2.  This is going to be the leg-warmer.  While the sleeve is still folded in half, cut off the edge.  Use the entire sleeve length, and I made mine the width of my calve so it would fit snuggly.  The finished sleeve end will be the top, the unfinished edge will be near the foot.  Repeat with other sleeve.

3.  This will be the mini-dress.  Cut the sweater body to fit your body type.  I made my dress very fitted.  I measured the top of my bust, under the bust, my waist, and hips.  Divide these measurements in half to cut both pieces at once.  (Or you could trace a dress that already fits and cut around it.)

4.  Sew up the sides of the dress.  I made sure my stripes lined up.

5.  Sew the legwarmers up the one side, creating a tube.

6.  Sew along the top hem of the dress, but leave one inch unhemmed.  Measure elastic over your bust and cut accordingly.  Attach a safety pin to one end of the elastic.  (My elastic was from an old fitted sheet.)  Feed the safety pin end through the hole, and pull through the entire casing you created.  Once it reaches the end, sew the two ends of the elastic together.  Hem the hole closed.

7.  Tada!  Match with accessories and leggings!