Hello World! Can Can Dancer has moved. Please visit www.cancandancer.com to see new DIY posts (and all past posts too!). Happy Crafting!

Fanny Pack made with Scrap Fabric

Over spring break I went to a 12,000 person rave in Seattle.  I didn't want to carry a purse, so I whipped up a fanny pack with a fabric from my scraps pile.  I used flannel, sweatshirt fleece and t shirt scraps. My fabric choices were a little crazy, but hey its a rave and everyone dresses a little weird. lol  Buying a fanny pack just for one night didn't seem very sustainable, and making one is so easy!



1.  Here are my pattern pieces.  They weren't perfect but they fit pretty close together.  I wouldn't add seam allowance if you make one, I had to trim it off once sewn together because I had too much excess.

2.  Cut out your pattern pieces and find something to use for the waistband.  You could use a necklace, an old belt, even a ribbon could work.  I made a very long braid with tshirt scraps.  (The hot pink is actually leftover from my previous tutorial.)  When I made my braid, I folded all of my strips in half so I would have a loop at the other end.

3.  Sew the two semi-circles to the small rectangle (gray top piece).  Insert the zipper between one semi circle edge and the matching edge of the short rectangle.  You'll end up with a oval-ish shape.

4.  I used a hook from a broken necklace for the closure of my waist piece.

5.  If you use this method, cut out a 2 inch scrap of fabric and feed it through the loop side of the closure piece.  

6.  Sew your waist pieces onto the oval shape you created.  NOTE:  I sewed mine on the wrong side and I had to seam rip them off and re-sew them because my fanny pack hung awkward.  Sew them on the opposite side (aka near the zipper).  Raw edges to the outside.  (see picture)

7.  Now I didn't get a good picture and this is hard to explain, but you will need to attach the long (gray) rectangle piece to each of the semi circle rounded edges (zebra).  Sew right sides together with your waist (braid) pieces safely inside.

8.  After those two edges are sewn, sew the short sides (gray) to the short matching edges (gray too).  Make sure you unzip your zipper during this last step, so it is easier to turn right side out.

9.  Turn your fanny pack right side out, and your ending shape is a semi-cylinder fanny-pack.


My fanny pack (even though I wore it in the front, lol) held up really well.  It lasted through the entire rave and I fit a smart phone, camera, wallet and pepper spray all in it just fine.

These are the only pics I have of it from the rave.  The bottom right picture is from a jumping picture fail. lol  I also wore two sets of nylons, which gave my legs the look of an optical illusion.  :)

No comments:

Post a Comment